返回
A bifunctional composite artificial solid electrolyte interphase for high stable solid-state lithium batteries
DOI:10.1016/j.colsurfa.2022.130600.png)
摘要
En 中文
Poor interfacial compatibility between lithium (Li) metal anode and solid electrolyte is the main obstacle for solid-state Li metal batteries. To address which prefabricating an artificial solid electrolyte interphase (SEI) film on the surface of lithium anode is an effective strategy. Here, a bifunctional composite artificial SEI film with high ionic conductivity and interface compatibility is provided via in-situ forming poly-1,3-dioxolane (PDOL)/ reduced graphene oxide (rGO) composite film on the surface of Li metal. The flexible high-ionic conductive PDOL improves the physical contact between the solid electrolyte and Li metal anode, and the rigid rGO effectively promotes the uniform plating of lithium ion (Li+) and suppresses the growth of Li dendrites. This rigid/flexible composite artificial SEI film not only boosts the interfacial transport of Li+, but also improves the interfacial compatibility between Li metal anode and solid electrolyte. Matching with PDOL solid electrolyte, the composite SEI film helps the Li symmetric cells to cycle stably for more than 350 h at a high current density of 0.3 mA/cm2 and an areal capacity of 0.3 mAh/cm2. Compared with the discharge specific capacity of pure Li metal anode, the discharge specific capacity of the assembled NCM622/PDOL & rGO-Li cell is increased by 17.5% at 2 C. This bifunctional composite SEI film provides a new idea for the surface modification of lithium metal anode.
Keyword:
Solid-state lithium battery
Anode
Artificial SEI
Li dendrites
Bifunctional
期刊
C
IF:
5.4
论文数:
4.7K
被引数:
7.7W
机构
引用论文
Facile synthesis of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte and its application for enhanced cyclic performance in lithium ion batteries through the introduction of an artificial Li3PO4 SEI layerNASICON型Li1.3Al0.3Ti1.7(PO4)3固体电解质的简易合成及其通过引入人造Li3PO4 SEI层在锂离子电池中增强循环性能的应用
RSC ADVANCES
IF4.6
Porous membrane host-derived in-situ polymer electrolytes with double-stabilized electrode interface enable long cycling lithium metal batteries具有双重稳定电极界面的多孔膜主体衍生的原位聚合物电解质可实现长循环锂金属电池
Electrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid ElectrolytesLi10GeP2S12和Li7La3Zr2O12固体电解质的电化学稳定性
Gradient SEI layer induced by liquid alloy electrolyte additive for high rate lithium metal battery高倍率锂金属电池液态合金电解液添加剂诱导的梯度SEI层
NANO ENERGY
IF17.1
1,3-dioxolane pretreatment to improve the interfacial characteristics of a lithium anode
RARE METALS
IF11
Double-Layer Polymer Electrolyte for High-Voltage All-Solid-State Rechargeable Batteries用于高压全固态可充电电池的双层聚合物电解质
ADVANCED MATERIALS
IF26.8

