A bond-based peridynamics model based on variable material properties for modeling elastoplastic behavior

Mohammad-Hadi Safari-Naderi

doi:10.1016/j.mtcomm.2023.105890

A bond-based peridynamics model based on variable material properties for modeling elastoplastic behavior

2023-06-01

4

PRE

AI

M

Mohammad-Hadi Safari-Naderi

M

M. Shakouri

A

Ahmad Ghasemi‐Ghalebahman *

DOI：10.1016/j.mtcomm.2023.105890

原文链接

原文求助

摘要

En 中文

Crack tip singularities and material discontinuities are taken to be the main challenges for analyzing cracks in fracture mechanics problems. Peridynamic (PD) theory has been recently introduced as a nonlocal extension of continuum mechanics capable of improved modeling of progressive damage and rupture in cracked structures. In this theory, the internal forces have been characterized by nonlocal interaction between the pairs of the material points whose displacements or displacement derivatives are discontinuous. Given that the bond-based PD (BB-PD) has not been satisfactorily employed for predicting ductile fracture, the main purpose of this work is to present a new PD plasticity model in conjunction with the Variable Material Property (VMP) method, aiming to provide the possibility of elastoplastic modeling in BB-PD. In the present work, the quasi-static loading has been selected for simulation and the von-Mises yield criterion has been utilized for describing the plastic deformation. The loadings are applied as the displacement is controlled and outputs from the PD model are compared with the results achieved from ABAQUS software based on the continuum mechanic assumptions. To validate the accuracy of the present formulation, two example problems of the plate with a central crack and a central hole subjected to tensile load are examined. The results of von-Mises stress, the plastic zone size, horizontal and vertical displacement, and equivalent plastic strain have been verified in comparison with the outputs calculated by the finite element method (FEM), evidencing good accuracy of the VMP-based PD elastoplastic model in predicting the desired parameters. To predict the formation of spontaneous cracks and crack growth trajectory, two more examples that include a plate with a central hole, as well as, a plate with two edge cracks and a double hole are discussed. The obtained results are in good agreement with those from the experiment and ABAQUS software.

Keyword:

Bond-based peridynamics

Variable Material Property (VMP) method

Von-Mises stress

Elastoplastic analysis

Finite element method (FEM)

A bond-based peridynamics model based on variable material properties for modeling elastoplastic behavior

摘要

期刊

机构

引用论文