返回
A contact electrification based wind generator
DOI:10.1016/j.sna.2018.07.043.png)
摘要
En 中文
A novel wind generator based on the contact electrification and electrostatic induction effects working in compound motions of vertical contact-separation and in-plane sliding is proposed and fabricated in this paper. Several parameters such as the number of friction pairs, angular velocity and ambient relative humidity (RH) were considered and their influence on the output performance of generator was analyzed. The results show that the output performance of the device is enhanced with the increasing number of friction pairs and the speed. The output voltages ranging from about 250 to 380 V are stably obtained by adjusting the number of friction pairs (1 to 4 pairs) and angular velocity (300 to 480 rpm). It can directly drive more than 100 LEDs and charge a 10 mu F capacitance within 10 s when working at 300 rpm for four friction pairs in RH=40%. The output voltage decreases violently from 250 V to 10 V as the RH increases from 40% to 60% due to the effect discharge under high RH. (C) 2018 Elsevier B.V. All rights reserved.
Keyword:
Wind harvesting
Contact electrification
Triboelectric nanogenerator
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.9
论文数:
1.6W
被引数:
3.3W
机构
引用论文
Improving energy conversion efficiency for triboelectric nanogenerator with capacitor structure by maximizing surface charge density
Nanoscale
IF5.1
Self-Powered, Wireless, Remote Meteorologic Monitoring Based on Triboelectric Nanogenerator Operated by Scavenging Wind Energy基于收集风能的摩擦电纳米发电机的自供电,无线,远程气象监测
Single-Electrode-Based Rotating Triboelectric Nanogenerator for Harvesting Energy from Tires基于单电极的旋转摩擦电纳米发电机,用于从轮胎中收集能量
ACS NANO
IF16
Single-Electrode-Based Sliding Triboelectric Nanogenerator for Self-Powered Displacement Vector Sensor System用于自供电位移矢量传感器系统的基于单电极的滑动摩擦纳米发电机
ACS NANO
IF16

