.png){kind=icon}
返回
A data-driven robust design optimization method and its application in compressor blade
.png){kind=icon}
PRE
AI
DOI：10.1063/5.0150040.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The probability-based robust optimization methods require a large amount of sample data to build probability distribution models of uncertain parameters. However, it is a common situation that only scarce sampled data are available in practice due to expensive tests. This study proposes a data-driven robust optimization framework by embedding a novel uncertainty quantification (UQ) method, which can quantify the uncertainty based on the statistical moments of scarce input data. The computational robustness and accuracy of the developed UQ methods are validated. Then, the data-driven multi-objective optimization framework is applied to improve the mean performance and aerodynamic robustness of a two-dimensional compressor blade with real stagger angle errors. Uncertainty analysis shows that there is a probability of 47.55% to deviate from the nominal total pressure loss coefficient by more than 1% for the actual performance values at high positive incidence i = 7 degrees condition. In the optimization process, the total pressure loss coefficient is selected as the objective function, while the static pressure ratio is used as a constraint. The Gaussian process regression model is trained to improve the robust optimization efficiency. The robust optimization is conducted under the most sensitive conditions. Optimized results indicate that compared with the nominal blade, the mean performance of the selected robust blades is increased by 10.9%, 8.56%, and 0.83%; the performance dispersion is decreased by 19.0%, 24.8%, and 35.3%, respectively. The optimized results can provide useful references for the robust design of compressor blades.
Keyword:
UNCERTAINTY QUANTIFICATION
POLYNOMIAL CHAOS
RELIABILITY-ANALYSIS
PERFORMANCE
IMPACT
FLOW
期刊
IF:
4.3
论文数:
2.9W
被引数:
8.0W
机构
引用论文
Multi-objective optimization of an ORC power plant using one-dimensional design of a radial-inflow turbine with backswept rotor blades使用带有后掠转子叶片的径向流入涡轮机的一维设计对ORC电厂进行多目标优化.png)
ENERGY
ENERGYIF9.4
PREAI
分享收藏Influence of leading edge with real manufacturing error on aerodynamic performance of high subsonic compressor cascades带真实制造误差的前缘对高亚音速压气机叶栅气动性能的影响
OAAI
OAAI分享收藏Quantification of initial-data uncertainty on a shock-accelerated gas cylinderPHYSICS OF FLUIDS
PHYSICS OF FLUIDSIF4.3
PREAI
分享收藏Review of improved Monte Carlo methods in uncertainty-based design optimization for aerospace vehicles基于不确定性的航空航天器优化设计中的改进蒙特卡洛方法综述
PREAI
分享收藏
Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement等几何分析: CAD、有限元、NURBS、精确几何和网格细化OAAI
OAAI分享收藏
查看更多内容