.png){kind=icon}
返回
A DEM-Based Factor to Design Rock-Socketed Piles Considering Socket Roughness
.png){kind=icon}
PRE
AI
DOI：10.1007/s00603-020-02347-1.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The Distinct Element Method (DEM) has gained recent attention to study geotechnical designs with rock-concrete or rock-rock interfaces, such as rock-socketed piles. In this work, 3D DEM models with non-standard contacts laws (the Smooth-Joint and Flat-Joint contact models) are proposed to analyze the response of axially loaded rock-socketed piles with different sockets roughness, since socket roughness is a key factor affecting their side shear resistance that is not usually considered for pile design. DEM models are calibrated using experimental data, and the consequences of applying 2D models for calibration, to be subsequently used in a 3D analysis, are studied. Numerical results suggest that such DEM models can be employed to reproduce key aspects of the behavior of rock-socketed piles, such as their load and global stiffness-settlement response, their side shear resistance, and the damage at the rock-pile interface. Finally, an empirical factor alpha(RF,1%D) is proposed to estimate the side shear resistance of rock-socketed piles considering the socket roughness and the uniaxial compressive strength (UCS) of the weaker material (rock or pile) at the interface.
Keyword:
DEM
PFC (particle flow code)
Smooth joint contact model
Flat joint contact model
Rock-socketed pile
Socket roughness
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.6
论文数:
6.2K
被引数:
3.0W
机构
引用论文
.png){kind=icon}
分享收藏On the optimum operating conditions of ThNe calibration lamps for measurements of radial velocity variations关于ThNe定标灯在测量径向速度变化时的最佳工作条件
OAAI
OAAI分享收藏分享收藏分享收藏
查看更多内容