A fast processing method to perform transient analysis for vibration control

doi:10.1016/j.simpat.2020.102152

2020-11-01

PRE

Şahin Yavuz *

Murat Akdağ

Hira Karagülle

DOI：10.1016/j.simpat.2020.102152

原文链接

原文求助

摘要

En 中文

Transient vibration analyses of structures with complex shapes are performed by finite element (FE) methods. Transient vibration analyses take long processing times for the systems having large number of degrees of freedom. A method performing the transient analyses very fast using the Fast Fourier Transform (FFT) is introduced in this work, and it is applied to a curved manipulator. Various analyses are required to determine the input parameters for vibration control, and each analysis takes long FE solution times. In this work, an FFT method is developed where the samples of the impulse response of the system under study is obtained by the FE software ANSYS first. The samples of the transfer function are then obtained by FFT, and transient responses are found for various vibration control parameters by using FFT. Transient response results for the complex system considered in this study are obtained approximately in 1 s with FFT method, while it takes 36 h with ANSYS. A one degree of freedom system is considered to verify the results of FFT method. Newmark's numerical, ANSYS, and FFT method results are compared, and it is observed that the results are in good agreement. A curved non-uniform steel manipulator with a complex shape is considered after the verification. The samples of the impulse response of the manipulator is found by ANSYS. Then, FFT method is used to obtain transient responses. A trapezoidal velocity profile is considered to analyze the residual vibration. The effect of the deceleration time on the root-meansquare (rms) values of the residual vibration is studied experimentally and using FFT method. It is observed that the results are in good agreement, and it is concluded that FFT method introduced in this study is very effective to study transient vibration problems in complex systems.

Keyword:

Flexible mechanical systems

Vibration control

FFT method