arrow
返回

A fast three-dimensional object recognition based on modulation analysis

delete2010-10-01
delete3
PRE
AI
Y
Ying Wang
X
Xianyu Su *
Y
Yunfu Dou
DOI:10.1016/j.optlaseng.2010.05.001delete
delete原文链接
delete原文求助
delete分享
delete收藏
摘要

摘要

En 中文
A novel method of the 3-D object recognition based on modulation analysis is proposed. Two orthogonal gratings with a small interval are vertically projected on an object surface and the recognized object is placed between the imaging planes of the two gratings Then the image of the object surface modulated by the orthogonal gratings can be obtained by a CCD camera from the same direction, and the object height information is encoded in the Image The image is processed by the operations consisting of performing the Fourier transform and spatial spectrum analysis. The fundamental frequency can be obtained in two different directions. Then we calculated the recognition parameter RP (the normalized energy of each fundamental frequency). According to the RP values, we can determine the object position in the 2-D orthogonal co-ordinate system The RP values will vary for different objects, so the different objects will be shown in different positions of the co-ordinate system The expressions of the recognition parameter in the space and spectrum region have been given in this work. There are some advantages of our method. Firstly, it can recognize the 3-D object by the fundamental frequency energy analysis in two directions of the frequency domain, which cannot be almost discerned from their 2-D intensity images. Secondly, it has the advantages of shift-invariance and rotation-Invariance, and can avoid the influence of shadow on 3-D object recognition. Finally the method has noise resistance ability. Both the computer simulation and the experimental results are presented in support of the proposed idea. (C) 2010 Elsevier Ltd. All rights reserved
Keyword:
3-D object recognition
Fringe analysis
Modulation measurement profilometry

期刊

Optics and Lasers in Engineering 封面图
Optics and Lasers in Engineering
IF:
3.7
论文数:
7.2K
被引数:
1.7W

机构

S
sichuan university
学者数:
12.1W
论文数: 7.8W
被引数: 100
引用论文

引用论文

err
IF0
err
err0
PREAI
err
err分享
err收藏
Best Practice Recommendations for Point-of-Care Lung Ultrasound in Patients with Suspected COVID-19
err2020-10-01
err0
errOAAI
errNicole M. Duggan; Hamid Shokoohi; Andrew S. Liteplo; Calvin Huang; Andrew J. Goldsmith
err分享
err收藏
err分享
err收藏
Analysis of distribution of wood extractives in Gmelina arborea by gas chromatography and time-of-flight secondary ion mass spectrometry
err2017-01-20
err0
PREAI
errBill Mangindaan; Yasuyuki Matsushita; Dan Aoki; Sachie Yagami; Fumio Kawamura; Kazuhiko Fukushima
err分享
err收藏
err分享
err收藏
Two big bones, one big decision: When to fix bilateral femur fractures
err2024-08-01
err0
PREAI
errSuzanne C. Arnold; Emanuele Lagazzi; Robert K. Wagner; Wardah Rafaqat; May Abiad; Dias Argandykov; Anne H. Hoekman; Vahe Panossian; Ikemsinachi C. Nzenwa; Mark Cote; John O. Hwabejire; Inger B. Schipper; Thuan V. Ly; George C. Velmahos
err分享
err收藏
没有更多内容