返回
A frequency response model matching method for PID controller design for processes with dead-time
DOI:10.1016/j.isatra.2014.08.020.png)
摘要
En 中文
In this paper, a PID controller design method for the integrating processes based on frequency response matching is presented. Two approaches are proposed for the controller design. In the first approach, a double feedback loop configuration is considered where the inner loop is designed with a stabilizing gain. In the outer loop, the parameters of the PID controller are obtained by frequency response matching between the closed-loop system with the PID controller and a reference model with desired specifications. In the second approach, the design is directly carried out considering a desired load-disturbance rejection model of the system. In both the approaches, two low frequency points are considered for matching the frequency response, which yield linear algebraic equations, solution of which gives the controller parameters. Several examples are taken from the literature to demonstrate the effectiveness and to compare with some well known design methods. (C) 2014 ISA. Published by Elsevier Ltd. All rights reserved.
Keyword:
PID controller
Integrating process
Dead-time
Frequency response matching
Double feedback loops
Load-disturbance rejection
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.5
论文数:
6.1K
被引数:
2.0W
机构
引用论文
Design of a simple setpoint filter for minimizing overshoot for low order processes
ISA TRANSACTIONS
IF6.5
A New Experimental Approach to Improve the Quality of Low Grade Silica; The Combination of Indirect Ultrasound Irradiation with Reverse Flotation and Magnetic Separation
Minerals
IF0

