.png){kind=icon}
返回
A High-Precision Time Interval Measurement Method Using Phase-Estimation Algorithm
.png){kind=icon}
PRE
AI
DOI：10.1109/TIM.2008.925025.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
High-precision time interval measurement is widely used in time synchronization, satellite navigation, laser ranging, and nuclear electronics. The resolution and accuracy of the currently used time counter are about 25 and 100 ps, respectively. A new time interval measurement method, in which the signal under test is used to trigger a sampler and the phase of the reference sinusoid signal is sampled to record the time stamp of the test signal, was put forward. Then, the sampled reference sine signal's phase is estimated by the interpolated fast Fourier transform (FFT), and 1-ps resolution and accuracy can theoretically be achieved. The test experiment of the prototype instrument shows that a 10-ps accuracy has been reached. If the hardware prototype is improved to reduce trigger jitter and sampling clock jitter, the measurement instrument may reach 1-ps accuracy. The measurement system is used not only for time interval measurement but also for period measurement and even modulation domain analysis.
Keyword:
Discrete Fourier transforms (DFTs)
phase estimation
time measurement
time synchronization
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.9
论文数:
2.0W
被引数:
6.1W
机构
引用论文
.png){kind=icon}
Determination of interface parameters for carbon/carbon composites by the fibre-bundle pull-out test
PREAI
分享收藏 没有更多内容
没有更多内容