.png){kind=icon}
返回
A hot-swap solution for paralleled power modules by using current-sharing interface circuits
.png){kind=icon}
PRE
AI
DOI：10.1109/TPEL.2006.882971.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A hot swap of power modules is required by high-availability parallel power module systems. With the hot-swappable paralleled power modules, the system up-time can be maximized, the system maintenance and repair can be simplified, and the system upgrade can be allowed for. In this paper, a simple hot-swap solution is proposed for the paralleled power modules which use current-sharing (CS) interface circuits to do the CS work. By redesigning the basic function circuits of. the CS interface circuits [4] (such as the under voltage protection circuit, the current-sharing circuit, and the light load protection circuit etc.), an additional hot-swap function can be implemented parasitically. There is no extra hot-swap controller and no compatibility problem between the hot-swap and CS solutions used. A prototype CS interface circuit with a parasitic hot-swap function was designed, implemented, and tested. The results show that the proposed hot-swap solution is feasible and suitable.
Keyword:
current-sharing (CS) interface circuit
hot swap
paralleled power module
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.5
论文数:
1.7W
被引数:
8.3W
机构
暂无机构信息
.png){kind=icon}
