arrow
返回

A model for process-based crash simulation

delete2008-05-01
delete17
PRE
AI
O
O.‐G. Lademo *
T
T. Berstad
M
Magnus Eriksson
T
Trond Furu
O
Odd Sture Hopperstad
M
M. Langseth
DOI:10.1016/j.ijimpeng.2007.03.004delete
delete原文链接
delete分享
delete收藏
摘要

摘要

En 中文
Manufacturing of a bumper system from aluminium extrusions often involves series of forming operations performed in the soft W-temper condition, and then artificially age-hardening of the components to the material's peak hardness T6 condition. It is probable that proper finite element (FE) modelling of the crash performance of the resulting systems must rely upon a geometry obtained from an FE model following the process route, i.e., including simulation of all major forming operations. The forming operations also result in an inhomogeneous evolution of some internal variables (among others the effective plastic strain) within the shaped components. Results from tensile tests reveal that plastic straining in W-temper leads to a significant change of the T6 work-hardening curves. In addition, the tests show that the plastic pre-deformation causes a reduction of the elongation of the T6 specimens. In the present work, these process effects have been included in a user-defined elastoplastic constitutive model in LS-DYNA incorporating a state-of-the-art anisotropic yield criterion, the associated flow rule and a non-linear isotropic work hardening rule as well as some ductile fracture criteria. A first demonstration and assessment of the modelling methodology is shown by 'through-process analysis' of two uniaxial tensile test series. The industrial use and relevance of the modelling technique is subsequently demonstrated by a case study on an industrial bumper beam system. (c) 2007 Elsevier Ltd. All rights reserved.
Keyword:
aluminium
anisotropy
forming
crash
AI总结

AI总结

对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。

期刊

International Journal of Impact Engineering 封面图
International Journal of Impact Engineering
IF:
5.7
论文数:
5.0K
被引数:
2.6W

机构

S
SINTEF
学者数:
82
论文数: 43
被引数: 3.4K
引用论文

引用论文

Pulse Electric Field-Assisted Extraction
err2011-12-29
err0
PREAI
errEugene Vorobiev; Nikolai Lebovka
err分享
err收藏
Survey on cooperative medium access control protocols
err2013-06-01
err0
PREAI
errPeijian Ju; Wei Song; Dizhi Zhou
err分享
err收藏
Ex vivo expansion of circulating CD34+ cells enhances the regenerative effect on rat liver cirrhosis
err2016-01-01
err0
errOAAI
errToru Nakamura; Hironori Koga; Hideki Iwamoto; Victor Tsutsumi; Yasuko Imamura; Masako Naitou; Atsutaka Masuda; Yu Ikezono; Mitsuhiko Abe; Fumitaka Wada; Takahiko Sakaue; Takato Ueno; Masaaki Ii; Cantas Alev; Atsuhiko Kawamoto; Takayuki Asahara; Takuji Torimura
err分享
err收藏
err分享
err收藏
Global Phylogeny ofMycobacterium tuberculosisBased on Single Nucleotide Polymorphism (SNP) Analysis: Insights into Tuberculosis Evolution, Phylogenetic Accuracy of Other DNA Fingerprinting Systems, and Recommendations for a Minimal Standard SNP Set
err2006-01-15
err0
errOAAI
errIngrid Filliol; Alifiya S. Motiwala; Magali Cavatore; Weihong Qi; Manzour Hernando Hazbón; Miriam Bobadilla del Valle; Janet Fyfe; Lourdes García-García; Nalin Rastogi; Christophe Sola; Thierry Zozio; Marta Inírida Guerrero; Clara Inés León; Jonathan Crabtree; Sam Angiuoli; Kathleen D. Eisenach; Riza Durmaz; Moses L. Joloba; Adrian Rendón; José Sifuentes-Osornio; Alfredo Ponce de León; M. Donald Cave; Robert Fleischmann; Thomas S. Whittam; David Alland
err分享
err收藏
Long-term renal allograft function
err1994-07-01
err0
PREAI
errG. Nyberg; G. Nordén; C. Svalander; I. Blohmé
err分享
err收藏
Failure prediction for advanced crashworthiness of transportation vehicles
err2004-08-01
err75
errOAAI
errPickett, AK; Pyttel, T; Payen, F; Lauro, F; Petrinic, N; Werner, H; Christlein, J
err分享
err收藏
学者 查看更多内容