.png){kind=icon}
返回
A Modulation Method for Capacitance Reduction in Active-Clamp Flyback-Based AC-DC Adapters
.png){kind=icon}
PRE
AI
DOI：10.1109/TPEL.2022.3157743.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Recent developments of fast-charging power delivery protocols are driving ac-dc adapters to 100-W power ranges. Conventional solutions in this power range employing a two-stage topology and a big twice-line frequency buffer capacitor are generally costly and bulky. This article presents a patent-pending modulation method for an active-clamp flyback converter, allowing for a single-stage adapter design with reduced capacitance requirements and higher efficiency. This is achieved by exploiting the inherent energy storage capability of the clamping capacitor while turning it into an active power buffer. No hardware modifications are needed, while all salient features of active-clamp flyback converter, i.e., soft switching and leakage recycling, are retained. Operating principles and detailed controller design are discussed, and a 100-W laboratory prototype is built. The prototype achieves 94% peak efficiency and up to 92% size reduction of the buffer capacitor. The experimental evaluation shows that the new single-stage solution enabled by the proposed modulation method is superior to the conventional two-stage and single-stage solutions in terms of cost, conversion efficiency, and power density.
Keyword:
Switches
Capacitors
Capacitance
Topology
Zero voltage switching
Clamps
Costs
AC
DC
active buffering
active decoupling
power factor
power factor correction (PFC)
single phase
soft switching
zero-voltage-switching (ZVS)
期刊
IF:
6.5
论文数:
1.7W
被引数:
8.3W
机构
引用论文
.png){kind=icon}
A Single-Stage LED Driver Based on Flyback and Modified Class-E Resonant Converters With Low-Voltage Stress基于反激式和改进型E类谐振变换器的低压应力单级LED驱动
PREAI
分享收藏分享收藏
查看更多内容