.png){kind=icon}
返回
A multi-objective optimization using response surface model coupled with particle swarm algorithm on FSW process parameters
.png){kind=icon}
OA
AI
DOI：10.1038/s41598-022-06652-3.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
In this study, multi-objective optimization of mechanical properties in friction-stir-welding of AH12 1050 aluminum alloy is performed using a combination of the response surface method and multi-objective particle swarm optimization algorithm. The process parameters are considered as tool pin diameter, shoulder diameter, rotational speed, feed speed, and tool tilt angle. The heat-affected zone's yield strength, fracture strain, impact toughness, and hardness on the advancing and retreating sides are selected as the objective functions. Threaded and simple conical pins are utilized to evaluate the effect of the pin geometry on the specimen mechanical properties. Optimization model outputs are in agree with the obtained experimental results. The effects of process parameters on the mechanical properties of the friction-stir-welded sheets are studied. Results reveal that the lower rotational speed and higher feed speed improve the material strength and hardness. Moreover, the microstructural analysis demonstrates that the proposed methodology can achieve a fine-grained structure with the minimum defects. Improvement in the material flow is observed for the threaded cylindrical pin compared with the conical pin due to the geometric shape of the tool pin leading to more functional mechanical properties. It is found that the combination of the response surface methodology and the multi-objective particle swarm algorithm led to the modeling and optimization of the process with outstanding accuracy and low experimental cost.
Keyword:
MECHANICAL-PROPERTIES
TENSILE BEHAVIOR
FRICTION
TAGUCHI
JOINTS
ERROR
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.9
论文数:
28.0W
被引数:
83.5W
机构
引用论文
Heteroatom‐Doped Porous Carbon Materials with Unprecedented High Volumetric Capacitive PerformanceOAAI
OAAI分享收藏Synthesis of thiazole analogues of the immunosuppressive agent (1R,2S,3R)-2-acetyl-4(5)-(1,2,3,4-tetrahydroxybutyl)imidazole免疫抑制药物(1R,2S,3R)-2-乙酰基-4(5)-(1,2,3,4-四羟基丁基)咪唑的噻唑类似物的合成
PREAI
分享收藏
Improving mechanical properties of friction stir welded AA2024-T3 joints by using a composite backplate.png)
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
PREAI
分享收藏分享收藏
查看更多内容