.png){kind=icon}
返回
A Multi-Objectives Genetic Algorithm Based Predictive Model and Strategy Optimization during SLM Process
.png){kind=icon}
OA
AI
DOI：10.3390/ma15134607.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Selective laser melting (SLM) process was optimized in this work using multi-objectives genetic algorithm. Process parameters involved in the printing process have an obvious impact on the quality of the printed parts. As the relationship between process parameters and the quality of different parts are complex, it is quite essential to study the effect of process parameter combination. In this work, the impact of four main process parameters, including defocusing amount, laser power, scan speed and layer thickness, were studied on overhanging surface quality of the parts with different inner structures. A multiple-factor and multiple-level experiment was conducted to establish a prediction model using regression analysis while multi-objective genetic algorithm was also employed here to improve the overhanging surface quality of parts with different inner shapes accordingly. The optimized process parameter combination was also used to print inner structure parts and compared with the prediction results to verify the model we have obtained before. The prediction results revealed that sinking distance and roughness value of the overhanging surface on a square-shape inner structure can reduce to 0.017 mm and 9.0 mu m under the optimal process parameters combination, while the sinking distance and roughness value of the overhanging surface on a circle-shape inner structure can decrease to 0.014 mm and 10.7 mu m under the optimal process parameters combination respectively. The testing results showed that the error rates of the prediction results were all within 10% in spite of random powder bonding in the printing process, which further proved the reliability of the previous results.
Keyword:
multi-objectives genetic algorithm
selective laser melting
overhanging surface quality
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.2
论文数:
5.7W
被引数:
15.1W
机构
引用论文
分享收藏
Study on the Geometric Design of Supports for Overhanging Structures Fabricated by Selective Laser Melting激光选区熔化成形悬垂结构支架几何设计研究.png)
MATERIALSOAAI
MATERIALSIF3.2
OAAI分享收藏Post-Processing Treatment Impact on Mechanical Properties of SLM Deposited Ti-6Al-4 V Porous Structure for Biomedical ApplicationMATERIALSOAAI
MATERIALSIF3.2
OAAI分享收藏
查看更多内容