.png){kind=icon}
返回
A multilevel thyristor rectifier with improved power factor
.png){kind=icon}
PRE
AI
DOI：10.1109/28.633798.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The thyristor bridge rectifier is a reliable and cost-effective topology commonly used in medium-voltage applications, Low and load-varying input displacement factor (IDF) and poor input harmonic current profile are the main drawbacks of this topology and are gaining more and more importance. This paper proposes modification of a conventional (18-pulse) thyristor rectifier to achieve higher power factor, The proposed topology employs one gate-turn-off (GTO) device across each upper bridge to short them out when necessary, hence, lowering the voltage level, decreasing the delay angle, and improving the power factor, In medium voltage (4160-V) ac drives, usually three devices are connected in series to withstand the voltage; therefore, the 18-pulse configuration has the same number of SCR's as compared to a six-pulse bridge, This paper includes analysis, simulation, and a comparison of the proposed topology with the conventional 6-, 12-, and 18-pulse thyristor bridges, Experimental results from a 10-kVA 12-pulse system verify the feasibility of the proposed topology.
Keyword:
AC drive
medium voltage
multilevel
power factor
thyristor bridge rectifier
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.5
论文数:
1.1W
被引数:
3.5W
机构
暂无机构信息
.png){kind=icon}
