返回
A novel thermic process for producing V-based solid solution type hydrogen storage alloy
DOI:10.2320/matertrans.42.1794.png)
摘要
En 中文
The performance of a high hydrogen capacity alloy, V-16%Ti-12%Ni-1.4%Nb-0.96%Co-2.8%Ta, is sensitively influenced by dissolved aluminum and oxygen, both of which can be removed from vanadium by a refining process, but the process currently used is too expensive. It is necessary to develop a process to remove these impurities at a reasonable cost. We propose a new method for production of the alloy. A V-15%Ni-1.8%Nb precursor with a low enough level of aluminum was produced by alumino-thermic reduction from a mixture of V2O5, Nb2O5 and nickel. Subsequently, a V-16%Ti-12%Ni-1.4%Nb-0.96%Co-2.8%Ta alloy was obtained by alloying the precursor and the other constituents of titanium, cobalt and tantalum, and by adding mischmetal as a reducing agent to remove oxygen to a low enough level. It was demonstrated that, by the method described here, the vanadium-based alloy could be produced at a reasonable cost.
Keyword:
vanadium
solid solution
hydrogen storage alloy
hydrogen absorption
pressure-composition-isotherm
thermic reduction
deoxidization
concentration equilibrium constant
mischmetal
oxygen
aluminum
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
1.9
论文数:
187
被引数:
1.1W
机构
暂无机构信息
引用论文
Influence of various additives in vanadium-based alloys V3TiNi0.56 on secondary phase formation, hydrogen storage properties and electrode properties钒基合金V3TiNi0.56中各种添加剂对第二相形成,储氢性能和电极性能的影响
Improvement of the cycle stability of vanadium-based alloy for nickel-metal hydride (Ni-MH) battery改善镍氢 (Ni-MH) 电池钒基合金的循环稳定性
10-Valent pneumococcal non-typeable H. influenzae protein D conjugate vaccine (PHiD-CV10) versus 13-valent pneumococcal conjugate vaccine (PCV13) as a booster dose to broaden and strengthen protection from otitis media (PREVIX_BOOST) in Australian Aboriginal children: study protocol for a randomised controlled trial
BMJ Open
IF0
没有更多内容

