.png){kind=icon}
返回
A partitioned two-step solution algorithm for concurrent fluid flow and stress-strain numerical simulation in solidification processes
.png){kind=icon}
OA
AI
DOI：10.1016/j.cma.2019.07.006.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
One of the critical challenges encountered when modeling solidification processes is to achieve a concurrent and efficient computation of fluid flow and solid mechanics. Several detrimental casting defects justify this development: cracks, either as a result of stresses built at surface or sub-surface in solidified regions during the filling stage of ingot casting, or due to hot tears deep in the mushy zone during solidification; macrosegregation, as a result of thermo-solutal convection flows and possible deformation of solid. It is therefore of crucial importance to provide for a global and synthetic analysis of casting processes considering a single numerical modeling that includes coupling between fluid flow and solid mechanics. A two-step solution strategy combining fluid flow and solid mechanics has been developed. A partitioned formulation is used, performing at each time increment, separately a solid-oriented resolution and a fluid-oriented resolution. Liquid flow (natural convection or forced flow during ingot filling stage), solidification shrinkage as well as thermally induced deformation of the solid regions are taken into account. The paper presents the numerical formulation in a level set finite element context, and associated validation tests. Application in a practical case corresponding to an ingot filling is proposed in order to investigate the solidification process and associated fluid flow and stress evolutions. Some discussions on computation time and other numerical aspects are also developed at the end in order to show the potential improvements of this methodology. (C) 2019 Elsevier B.V. All rights reserved.
Keyword:
Solidification
Solid-fluid interaction
Thermohydraulics
Thermomechanics
Finite element
Level set
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
7.3
论文数:
1.3W
被引数:
5.6W
机构
引用论文
Biomaterials and cardiovascular devices.png)
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in MedicineIF0
PREAI
分享收藏Development and Validation of the University of Washington Clinical Assessment of Music Perception Test华盛顿大学音乐知觉临床评估测试的开发和验证OAAI
OAAI分享收藏Natalizumab Significantly Improves Cognitive Impairment over Three Years in MS: Pattern of Disability Progression and Preliminary MRI FindingsPLOS ONEOAAI
PLOS ONEIF0
OAAI分享收藏Viscoplastic behaviour of porous metallic materials saturated with liquid .1. Constitutive equations
PREAI
分享收藏
查看更多内容