返回
A physically based dynamic model for solid oxide fuel cells
DOI:10.1109/TEC.2007.895468.png)
摘要
En 中文
This paper presents a physically based dynamic model for tubular solid oxide fuel cells (SOFCs) based on the electrochemical and thermodynamic characteristics inside SOFC. The diffusion, material conservation,electrochemical, and thermodynamic equations are used to develop the SOFC model. The effect of temperature on the steady-state (V-I and P-I) characteristics of the SOFC model has been studied, and the model responses have been obtained for constant fuel flow as well as for constant fuel utilization operating modes. The dynamic characteristics of the model are investigated in small, medium, and large timescales, from milliseconds to minutes. The model has been implemented in MATLAB/Simulink and used to investigate the distributed generation applications of SOFCs.
Keyword:
constant fuel flow
constant fuel utilization
distributed generation
dynamic model
fuel cell
operating mode
solid oxide fuel cell (SOFC)
timescale
期刊
IF:
5.4
论文数:
6.8K
被引数:
1.5W
机构
暂无机构信息
引用论文
Dynamic models and model validation for PEM fuel cells using electrical circuits使用电路的PEM燃料电池的动态模型和模型验证
A digital reverse current self-calibration technique in 90% high efficiency rectified power supply for near field communication through magnetic field induction磁场感应近场通信90% 高效整流电源的数字反向电流自校准技术
A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness固体氧化物燃料电池的完全极化模型及其对电池组件厚度变化的敏感性

