A robust level error estimation method for machine tool installation

Kotaro Mori

doi:10.1016/j.precisioneng.2019.04.014

A robust level error estimation method for machine tool installation

2019-07-01

9

PRE

AI

DOI：10.1016/j.precisioneng.2019.04.014

原文链接

原文求助

摘要

En 中文

The accuracy of the machine tool is essential for precision manufacturing. Many machines with long bed are often require more than four supports to compensate the deformations of the bed. This leveling and alignment of machine bed guarantees the accuracies of the.machine tool. During the installation of these Machines, it is important to compensate the unevenness of floor at the installation site. This adjustment procedure is called level adjustment. Because of the circular changes, level adjustments are also regularly required to maintain accuracy. In conventional level adjustment methods, level adjustments are performed by skilled installers based on their experience utilizing measurement results with a trial-and-error method. For inexperienced technicians, the task of making a level adjustment in a short time is not easy. Thus, a model-based level adjustment method is demanded. However, the conventional model-based method was not suitable for practical environments. The effect of measurement noise is not considered enough. In this paper, a noise-robust level adjustment method is proposed, that utilizes a model between preload change of supports and leveling. It can estimate level errors from preload changes of supports. The consideration of preload measurement noises allows implementing this system with practical preload sensors. In this paper, the fundamentals of the proposed method are experimentally investigated on a test bench. Then, the feasibility of the method is investigated on a machining center with simulations.

Keyword:

Machine tool

Installation

Level adjustment

Preload measurement

Condition monitoring

A robust level error estimation method for machine tool installation

摘要

AI总结

期刊

机构

引用论文