.png){kind=icon}
返回
A Soft-Aided Staircase Decoder Using Three-Level Channel Reliabilities
.png){kind=icon}
OA
AI
DOI：10.1109/JLT.2021.3096377.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The soft-aided bit-marking (SABM) algorithm is based on the idea of marking bits as highly reliable bits (HRBs), highly unreliable bits (HUBs), and uncertain bits to improve the performance of hard-decision (HD) decoders. The HRBs and HUBs are used to assist the HD decoder to prevent miscorrections and to decode those originally uncorrectable cases via bit flipping (BF), respectively. In this paper, an improved SABM algorithm (called iSABM) is proposed for staircase codes (SCCs). Similar to the SABM, iSABM marks bits with the help of channel reliabilities, i.e., using the absolute values of the log-likelihood ratios. The improvements offered by iSABM include: (i) HUBs being classified using a reliability threshold, (ii) BF randomly selecting HUBs, and (iii) soft-aided decoding over multiple SCC blocks. The decoding complexity of iSABM is comparable of that of SABM. This is due to the fact that on the one hand no sorting is required (lower complexity) because of the use of a threshold for HUBs, while on the other hand multiple SCC blocks use soft information (higher complexity). The gains achieved by iSABM are up to 0.53 dB with respect to SABM and up to 0.91 dB with respect to standard decoding of SCCs at a bit error rate of 10(-6). Furthermore, it is shown that using 1-bit reliability marking, i.e., only having HRBs and HUBs, only causes a gain penalty of up to 0.25 dB with a significantly reduced memory requirement.
Keyword:
Optical fiber communications
forward error correction
log-likelihood ratios
staircase codes
quantization
期刊
IF:
4.8
论文数:
1.7W
被引数:
3.8W
机构
引用论文
.png){kind=icon}
One and Two Bit Message Passing for SC-LDPC Codes With Higher-Order Modulation高阶调制的sc-ldpc码的一位和两位消息传递
OAAI
OAAI分享收藏分享收藏Numerical investigation on photonic microwave generation by a sole excited-state emitting quantum dot laser with optical injection and optical feedback*基于光学注入和光学反馈的单激发态发射量子点激光器的光子微波产生数值研究*
PREAI
分享收藏
查看更多内容