.png){kind=icon}
返回
Active dynamic vibration absorber for flutter suppression
.png){kind=icon}
PRE
AI
DOI：10.1016/j.jsv.2019.115110.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A novel flutter suppression technique is proposed using an active dynamic vibration absorber (ADVA). The ADVA is introduced by adding an active element to a classical mass-spring-damper system. This active element drives the mass by a controlling force using feedback signal from the response of the aeroelastic system. An aeroelastic mathematical model of a 2 degrees of freedom (D0Fs) airfoil equipped with the proposed ADVA is established based on unsteady aerodynamics theory. The proposed ADVA is experimentally realized by a cantilever beam with a bonded Macro-fiber Composite (MFC) and a lumped mass. MFC nonlinearities are compensated by applying Prandtl-Ishlinskii approach to design a proportional integral (PI)-based hysteresis compensator controller. A test rig is designed, fabricated and the parameters of the physical airfoil model and the connected ADVA are identified. The feasibility of the ADVA for flutter suppression is assessed via a wind tunnel testing. The experimental results show that applying the closed-loop ADVA increases the airfoil flutter speed by 42.9%. Whereas the open-loop ADVA results in 26.6% improvement in the flutter speed. Moreover, if the airfoil experiences a high amplitude limit cycle oscillation (LCO), the ADVA efficiently suppresses up to 93.3% of its amplitude when turned to the closed-loop control. (C) 2019 Elsevier Ltd. All rights reserved.
Keyword:
Flutter
LCO
Dynamic vibration absorber
Closed-loop control
Macro-fiber composite (MFC)
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.9
论文数:
1.7W
被引数:
4.8W
机构
引用论文
Modeling and simulation of macro-fiber composite layered smart structures.png)
COMPOSITE STRUCTURES
COMPOSITE STRUCTURESIF7.1
PREAI
分享收藏分享收藏
查看更多内容