.png){kind=icon}
返回
Active Reconfigurable Intelligent Surface-Aided Wireless Communications
.png){kind=icon}
OA
AI
DOI：10.1109/TWC.2021.3064024.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Reconfigurable Intelligent Surface (RIS) is a promising solution to reconfigure the wireless environment in a controllable way. To compensate for the double-fading attenuation in the RIS-aided link, a large number of passive reflecting elements (REs) are conventionally deployed at the RIS, resulting in large surface size and considerable circuit power consumption. In this paper, we propose a new type of RIS, called active RIS, where each RE is assisted by active loads (negative resistance), that reflect and amplify the incident signal instead of only reflecting it with the adjustable phase shift as in the case of a passive RIS. Therefore, for a given power budget at the RIS, a strengthened RIS-aided link can be achieved by increasing the number of active REs as well as amplifying the incident signal. We consider the use of an active RIS to a single input multiple output (SIMO) system. However, it would unintentionally amplify the RIS-correlated noise, and thus the proposed system has to balance the conflict between the received signal power maximization and the RIS-correlated noise minimization at the receiver. To achieve this goal, it has to optimize the reflecting coefficient matrix at the RIS and the receive beamforming at the receiver. An alternating optimization algorithm is proposed to solve the problem. Specifically, the receive beamforming is obtained with a closed-form solution based on linear minimum-mean-square-error (MMSE) criterion, while the reflecting coefficient matrix is obtained by solving a series of sequential convex approximation (SCA) problems. Simulation results show that the proposed active RIS-aided system could achieve better performance over the conventional passive RIS-aided system with the same power budget.
Keyword:
Wireless communication
Array signal processing
Radio frequency
Surface treatment
Surface resistance
Signal to noise ratio
Relays
Reconfigurable intelligent surface (RIS)
active load
negative resistance
optimization
期刊
IF:
10.7
论文数:
1.3W
被引数:
5.3W
机构
引用论文
Symbiotic Radio: Cognitive Backscattering Communications for Future Wireless Networks共生无线电: 未来无线网络的认知反向散射通信
OAAI
OAAI分享收藏Shaping complex microwave fields in reverberating media with binary tunable metasurfaces.png)
SCIENTIFIC REPORTSOAAI
SCIENTIFIC REPORTSIF3.9
OAAI分享收藏分享收藏A 4-GHz Active Scatterer in 130-nm CMOS for Phase Sweep Amplify-and-Forward130纳米CMOS中用于相位扫描放大和正向的4ghz有源散射体
PREAI
分享收藏Nitrogen and Carbon Biogeochemistry in Forest Sites along an Indirect Urban–Rural Gradient in Southeastern MichiganForestsOAAI
ForestsIF0
OAAI分享收藏分享收藏
查看更多内容