返回
Adaptive Sampling-Based Moving Obstacle Avoidance for Cable-Driven Parallel Robots
DOI:10.1109/TMECH.2022.3169812.png)
摘要
En 中文
The ability to avoid the moving obstacle is critical to cable-driven parallel robots (CDPRs) operating in real-world environments. However, the moving obstacle raises extraordinary challenges for CDPRs due to various constraints introduced by cables. In this article, an adaptive sampling-based path planning method is presented for CDPRs to find collision-free trajectories under dynamic scenarios. In detail, the suggested method is based on the rapidly exploring random tree algorithm; it allows the robot to deal with complex constraints, such as cable collision and dynamic feasible workspace. To handle dynamic environments, partial motion planning with forward simulation is employed to construct an optimal time-based tree, and the predicted collision is checked in a closed-loop system. In particular, the swept volume caused by the time interval is considered, and the Gilbert-Johnson-Keerthi algorithm is applied for collision detection. Finally, a vision system with double webcams is designed to track the moving obstacle; the image processing based on morphological operations is introduced to segment the moving objects and automatically initialize a tracking box. Simulation results show that the proposed method can efficiently avoid the moving obstacle; these results are, then, validated experimentally using a built eight-cable-driven parallel robot with a drone as the moving obstacle.
Keyword:
Adaptive sampling-based motion planning
cable-driven parallel robots (CDPRs)
dynamic environment
image processing
期刊
I
IF:
7.3
论文数:
5.6K
被引数:
2.4W
机构
引用论文
Rest-to-Rest Trajectory Planning for Underactuated Cable-Driven Parallel Robots欠驱动缆索驱动并联机器人的静止到静止轨迹规划
Bipolar Plasmakinetic Transurethral Resection of Prostate in 132 Consecutive Patients With Large Gland: Three-year Follow-up Results
Urology
IF0
Analysis of stiffness controllability of a redundant cable-driven parallel robot based on its configuration基于构型的冗余索驱动并联机器人刚度可控性分析
MECHATRONICS
IF3.1

