.png){kind=icon}
返回
Aggregate Roundness Classification Using a Wire Mesh Method
.png){kind=icon}
OA
AI
DOI：10.3390/ma13173682.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Herein, we suggest a wire mesh method to classify the particle shape of large amounts of aggregate. This method is controlled by the tilting angle and opening size of the wire mesh. The more rounded the aggregate particles, the more they roll on the tilted wire mesh. Three different sizes of aggregate: 11-15, 17-32, and 33-51 mm were used for assessing their roundness after classification using the sphericity index into rounded, sub-rounded/sub-angular, and angular. The aggregate particles with different sphericities were colored differently and then used for classification via the wire mesh method. The opening sizes of the wire mesh were 6, 11, and 17 mm and its frame was 0.5 m wide and 1.8 m long. The ratio of aggregate size to mesh-opening size was between 0.6 and 8.5. The wire mesh was inclined at various angles of 10 degrees, 15 degrees, 20 degrees, 25 degrees, and 30 degrees to evaluate the rolling degree of the aggregates. The aggregates were rolled and remained on the wire mesh between 0.0-0.6, 0.6-1.2, and 1.2-1.8 m depending on their sphericity. A tilting angle of 25 degrees was the most suitable angle for classifying aggregate size ranging from 11-15 mm, while the most suitable angle for aggregate sizes of 17-32 and 33-51 mm was 20 degrees. The best ratio for the average aggregate size to mesh-opening size for aggregate roundness classification was 2.
Keyword:
aggregate
classification
wire mesh
roundness
tilting angle
opening size
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.2
论文数:
5.7W
被引数:
15.1W
机构
引用论文
.png){kind=icon}
没有更多内容
没有更多内容