.png){kind=icon}
返回
Aircraft engine nozzle guide vane surface temperature optimization
.png){kind=icon}
OA
AI
DOI：10.1016/j.heliyon.2023.e20222.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
An optimization method based on the sensitivity of global and local geometric parameters is proposed to improve the cooling efficiency of E3 engine nozzle guide vane. For 29 geometric parameters that affect the vane maximum temperature in the cooling design, the sensitivity ranking of them is firstly obtained by the DOE method. Then the most influential parameters including the diameter or location of the film cooling hole are selected as the optimization var-iables to decrease the maximum surface temperature of the nozzle guide vane. On this basis, to further reduce the local temperature downstream the pressure side, a new duck-paw type film cooling hole is applied. The duck-paw type film cooling hole was produced with the adjoint method through identifying the sensitivity of the geometric boundary parameters of the film cooling holes. Compared to the cylindrical holes, the duck-paw shaped film cooling hole can greatly improve the cooling efficiency under the same conditions. The duck-paw type film cooling holes are applied to the last two rows of film cooling holes located on the pressure side of nozzle guide vane. Three-dimensional conjugate flow and heat transfer analysis results show that the maximum temperature of the optimized cooling structure vane is reduced by 39K, and the average temperature decreases by nearly 20K.
Keyword:
Conjugate heat transfer
Sensitivity analysis
Duck -paw type film cooling hole
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.6
论文数:
3.8W
被引数:
10.5W
机构
引用论文
.png){kind=icon}
分享收藏分享收藏Optimization of laser welding process parameters of stainless steel 316L using FEM, Kriging and NSGA-II使用FEM，Kriging和nsga-ii优化不锈钢316L的激光焊接工艺参数
PREAI
分享收藏
查看更多内容