返回
Al modification layer method for enhancing InAlZnO transistors
DOI:10.1016/j.apsusc.2024.161744.png)
摘要
En 中文
In this work, a surface engineering method is proposed to boost electrical performance and stability of the InAlZnO (IAZO) transistors, of which an Al modification layer is deposited on surface of the IAZO channel layer. Through analysed by transmission electron microscope and X-ray photoelectron spectroscopy, the IAZO thin film with Al modification layer undergoes a reduction reaction to generate more oxygen vacancies. Hall effects measurement further demonstrates that IAZO thin films with Al modification layer exhibit higher carrier concentrations than the ones without Al modification layer. The IAZO transistors with Al modification layer exhibit better performance and stability, including a field-effect mobility of 4.36 cm2 V-1s-1 (an improvement of about three-fold), a small subthreshold swing of 105.23 mV/decade, a high on-to-off current ratio greater than 107, and a threshold voltage shift of less than 0.50 V under positive and negative gate bias stress. Moreover, the IAZO transistors with Al modification layer demonstrate high thermal stability under 400 degrees C for 120 min in air atmosphere. Based on this method, the IAZO inverters have been implemented with high voltage gain of 87.55 V/ V. This surface engineering technology paves the way for application of high-performance oxide transistors for advanced monolithic three-dimensional integration.
Keyword:
3D-monolithically
Oxide transistors
Surface engineering
Modification layer
期刊
IF:
6.9
论文数:
6.2W
被引数:
19.4W
机构
引用论文
High-mobility electrolyte-gated perovskite transistors on flexible plastic substrate via interface and composition engineering通过界面和成分工程在柔性塑料衬底上实现高迁移率电解质门控钙钛矿晶体管
Mechanism of carrier controllability with metal capping layer on amorphous oxide SiZnSnO semiconductor
SCIENTIFIC REPORTS
IF3.9

