.png){kind=icon}
返回
Algorithm-driven optimization of lithium-ion battery thermal modeling
.png){kind=icon}
OA
AI
DOI：10.1016/j.est.2023.107388.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Detailed modeling of battery thermal behaviour has high computational demand due to the presence of multiscale and multi-physics phenomena. For battery module/pack level simulation, a simple and accurate battery heat generation estimation is urgently required. This paper investigates the optimization of thermal numerical modeling for cylindrical 21,700 lithium-ion batteries with a nominal capacity of 5 Ah. A 3-dimensional battery model was built in the Multiphysics simulation software, COMSOL. The heat source of the model adopts a commonly used heat generation model incorporating irreversible and reversible heat. Correction factors, as a function of the state of charge, were introduced to the calculation of irreversible heat item. The Particle Swarm Optimization (PSO) algorithm, written in MATLAB, was coupled with the COMSOL numerical model to minimize the prediction error by varying correction factors. Battery surface temperature data under the continuous discharge tests (0.5C-3.5C) and dynamic loads were experimentally obtained and used to validate the model. The simulation results of the unoptimized model showed a discrepancy of up to 5 degrees C with the experimental data. After optimization, the prediction error was reduced to less than 0.5 degrees C on average. The optimized model was applied to predict the thermal behaviour of a battery module (16 aged cells) using oil-based immersion cooling. The pristine battery module with coolant flow velocities of 0.01 m/s was chosen as the baseline. The results indicate that the aged battery modules with internal resistance of 50 m omega and 75 m omega require coolant flow velocities of 0.05 m/s and 0.12 m/s, respectively, to achieve the baseline temperature. The study highlights a high-precision and low-computational cost approach for heat generation calculation of lithium-ion batteries is provided, which contributes to the development of battery thermal management systems.
Keyword:
Lithium -ion battery
Thermal modeling
Particle Swarm Optimization
Thermal management
Immersion cooling
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
9.8
论文数:
2.3W
被引数:
10.1W
机构
引用论文
A novel dielectric fluid immersion cooling technology for Li-ion battery thermal management一种用于锂离子电池热管理的新型介电液浸没冷却技术
PREAI
分享收藏Air and PCM cooling for battery thermal management considering battery cycle life考虑电池循环寿命的空气和PCM冷却用于电池热管理OAAI
OAAI分享收藏
Numerical investigation on a lithium-ion battery thermal management system utilizing a double-layered I-shaped channel liquid cooling plate exchanger双层I形通道液冷板式换热器锂离子电池热管理系统的数值研究
PREAI
分享收藏Plug-in hybrid electric vehicle LiFePO4 battery life implications of thermal management, driving conditions, and regional climate插电式混合动力汽车LiFePO4电池寿命对热管理、驾驶条件和区域气候的影响OAAI
OAAI分享收藏Investigation of thermal management of lithium-ion battery based on micro heat pipe array基于微热管阵列的锂离子电池热管理研究
PREAI
分享收藏Direct Comparison of Immersion and Cold-Plate Based Cooling for Automotive Li-Ion Battery Modules汽车锂离子电池模块浸没式和冷板冷却的直接比较.png)
ENERGIESOAAI
ENERGIESIF3.2
OAAI分享收藏A comparative study on battery thermal management using phase change material (PCM)相变材料 (PCM) 电池热管理的比较研究
PREAI
分享收藏
查看更多内容