.png){kind=icon}
返回
An accelerated springback compensation method
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ijmecsci.2006.09.008.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Part shape error due to springback is usually considered to be a manufacturing defect in sheet metal forming process. This problem can be corrected by adjusting the tooling shape to the appropriate shape and/or active process control. In this paper, the focus will be on tooling shape design. The traditional trial-and-error methods are inefficient for complex dies. Several analytical methods have been proposed in recent years. Each of these has their advantages and disadvantages. As expected, all these methods required a few iteration steps before converting to the desired tooling shape. Here, we put all of these proposed methods under the same framework. Additionally, built upon existing methods, a new methodology is proposed by incorporating pure geometry correction with fundamental mechanics analysis. Consequently, the convergence becomes much faster and certain. Tooling design results from the new method, together with three existing methods, are compared with each other and an experiment. (c) 2006 Elsevier Ltd. All rights reserved.
Keyword:
springback
sheet metal forming
finite element
die design
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
9.4
论文数:
1.0W
被引数:
4.5W
机构
暂无机构信息
引用论文
.png){kind=icon}
分享收藏
分享收藏分享收藏 没有更多内容
没有更多内容