.png){kind=icon}
返回
An improved model for the disking process
.png){kind=icon}
PRE
AI
DOI：10.1016/S0924-0136(02)00159-0.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The disking process is an alternative to diamond-sawing for the cutting of brittle rods and bars. Disking involves positioning a pre-cracked, brittle cylindrical rod snug inside an elastic, annular sheath and subjecting the composite to biaxial fluid pressure. At a critical pressure the crack runs across the section of the rod producing a clean cut. A model that considers the influence of the interface between the rod and the sheath is presented here for predicting fracture pressures. The model is based on linear-elastic-fracture-mechanics. A concentric circular cylinders model is assumed with the flaw modeled as an annular crack perpendicular to the interface. The bond at the interface is considered to be imperfect and is represented by distributed shear springs. Stress intensity factors at the crack tip are determined as a function of material, interface, and geometrical parameters. Analytical results indicate that the shear stiffness of the interface strongly influences the stress intensity factors and consequently the fracture pressures. These analytical results compare favorably with experimentally determined fracture pressures. (C) 2002 Elsevier Science B.V. All rights reserved.
Keyword:
cutting
ceramics
fracture
cracks
disking
manufacturing
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
J
IF:
7.5
论文数:
1.6W
被引数:
4.5W
机构
暂无机构信息
引用论文
A low kickback noise and offset calibrated dynamic comparator for 2B/C SAR ADC.png)
2014 12th IEEE International Conference on Solid-State and Integrated Circuit Technology (ICSICT)
2014 12th IEEE International Conference on Solid-State and Integrated Circuit Technology (ICSICT)IF0
PREAI
分享收藏Phylogenetic position of Sphaerospora testicularis and Latyspora scomberomori n. gen. n. sp. (Myxozoa) within the marine urinary cladeParasitology
ParasitologyIF0
PREAI
分享收藏
没有更多内容
没有更多内容