.png){kind=icon}
返回
An improved NExT method for modal identification with tests validation
.png){kind=icon}
PRE
AI
DOI：10.1016/j.engstruct.2022.115192.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The Natural Excitation Technique (NExT) is widely used in structural modal parameter identification. However, the cross-correlation function is susceptible to the mode shape of each order, which is obtained by the traditional NExT method combined with other modal identification methods between the two measuring points, resulting in large errors of the identified frequency and damping ratio of various modes. Therefore, in this study, to obtain the modal responses of the target order correctly and eliminate interaction of various modes, a new combined NExT method with improved Empirical Mode Decomposition (EMD) method is developed. The improved NExT method is introduced firstly, then, the structural modal parameters are identified by five different methods, which are Ibrahim Time Domain Technique, Sparse Time Domain Algorithm, Autoregressive Moving Average timing method, Least Square Complex Exponential and Eigensystem Realization Algorithm respectively. The correction and improvement of the new method are verified through a simple-supported beam experiment and a shaking table test of a 12-story benchmark tall building at Tongji University. The structural modal parameters are identified and compared through adopting traditional NExT method and the proposed new NExT algorithm. Results illustrate that the improved NExT algorithm in this paper has a higher accuracy and effectiveness than the traditional one in structural modal parameter identification.
Keyword:
Modal parameter identification
Natural Excitation Technique
Empirical mode decomposition
Shaking table test
System identification
期刊
IF:
6.4
论文数:
2.1W
被引数:
8.7W
机构
引用论文
.png){kind=icon}
Fast diffusion in a room temperature ionic liquid confined in mesoporous carbon限制在介孔碳中的室温离子液体中的快速扩散
PREAI
分享收藏
查看更多内容