返回
Anodic Solid Electrolyte Interphase Formed around the Li2OHBr/ LiCoO2 Interface
DOI:10.1021/acsaem.2c04103.png)
摘要
En 中文
4 V-class oxide-based all-solid-state batteries, Li/ Li2OHBr/LiCoO2, are prepared using ductile antiperovskitestructured Li2OHBr via room-temperature densification. The effects of anodic decomposition of Li2OHBr on the LiCoO2/ Li2OHBr interfacial resistance and charge???discharge stabilities are investigated. Li2OHBr decomposes on LiCoO2 at 3.6 V vs. Li/Li+, and an irreversible charging capacity is observed in the first cycle. This anodic decomposition does not increase the resistance at the LiCoO2/Li2OHBr interface and in Li2OHBr. Transmission electron microscopy analysis shows an anodic-decomposed region of Li2OHBr with a thickness of ???30 nm between the LiCoO2 and Li2OHBr phases. This thickness is almost consistent with the expected value assuming a one- to two-electron anodic decomposition reaction of Li2OHBr. The resulting solid electrolyte interphase will have acceptable Li+ conductivity and improves the adhesion of the interface. The surface coating of amorphous lithium phosphate stabilizes charge???discharge reactions probably by suppressing proton insertion into LiCoO2.
Keyword:
all-solid-state battery
interface
Li2OHBr
solid electrolyte interphase
thin film
期刊
IF:
5.5
论文数:
1.1W
被引数:
4.5W
机构
引用论文
LiCoO2 thin tilm cathode fabrication by rapid thermal annealing for micro power sources
ELECTROCHIMICA ACTA
IF5.6
First-principles estimation of partition functions representing disordered lattices such as the cubic phases of Li2OHCl and Li2OHBr
PHYSICAL REVIEW B
IF3.7
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery具有良好力学性能的全固态锂电池硫化物固体电解质
SCIENTIFIC REPORTS
IF3.9
Clarifying the relationship between redox activity and electrochemical stability in solid electrolytes阐明固体电解质中氧化还原活性与电化学稳定性的关系
NATURE MATERIALS
IF38.5
Time-of-flight secondary ion mass spectrometry study of lithium intercalation process in LiCoO2 thin filmLiCoO2薄膜嵌锂过程的飞行时间二次离子质谱研究

