返回
Asphalt modification with different polyethylene-based polymers
DOI:10.1016/j.eurpolymj.2005.05.034.png)
摘要
En 中文
Several polyethylene and polyethylene-based copolymers were used to modify a 70/100 penetration grade asphalt from vacuum distillation. The morphological and storage stability analyses showed that, in all cases, the obtained materials were strongly biphasic and tended to separate into polymer-rich and asphalt-rich phases. However, among the tested polymers, a linear low-density polyethylene allowed for the preparation of a mix that had strongly enhanced mechanical properties, with respect to those of the base asphalt. Mixes with different percentages of this polymer were, therefore, prepared and studied from a rheological point of view, both in the range of small and large deformations. The analysis showed that, in spite of its insolubility, the polymer spread continuously through the asphalt matrix and that the obtained properties can probably be ascribed to the formation of a very low extent of crosslinking between the polymer chains. (c) 2005 Elsevier Ltd. All rights reserved.
Keyword:
polymer modified asphalts
polyethylene (PE)
rheology
crosslinking
期刊
IF:
6.3
论文数:
1.3W
被引数:
3.6W
机构
暂无机构信息
引用论文
Notch-RBP-J-Independent Marginal Zone B Cell Development in IgH Transgenic Mice with VH Derived from a Natural Polyreactive Antibody
PLoS ONE
IF0
Rheology of asphalts modified with glycidylmethacrylate functionalized polymers用甲基丙烯酸缩水甘油酯官能化聚合物改性的沥青的流变学
Dispersion of polyolefins in bitumen by means of tall oil pitch, and microscopic characterization of mixes通过妥尔油沥青将聚烯烃分散在沥青中,并对混合物进行微观表征
FUEL
IF7.5

