.png){kind=icon}
返回
Asphalt pavement modulus backcalculation using surface deflections under moving loads
.png){kind=icon}
PRE
AI
DOI：10.1111/mice.12624.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The measurement of pavement surface deflections under moving loads can be used for evaluation of pavement structural condition. The objective of this paper is to develop an innovative backcalculation method to calculate pavement layer moduli based on traffic speed deflectometer (TSD) measurements and analyze factors influencing backcalculation results. The backcalculation method is based on 2.5D finite element method (FEM) and constrained extended Kalman filter (CEKF). Field measurements at different pavement sections were used to verify the accuracy of backcalculation results. Parametric analysis was conducted to evaluate the influences of traffic loading and pavement structure variations in the field. It was found that the backcalculation results were considerably affected by the variation of asphalt layer thickness and dynamic loading due to pavement surface roughness. A heavy truck passing the adjacent lane during TSD testing could also cause variation of backcalculation results.
Keyword:
SPEED DEFLECTOMETER DATA
LAYER-MODULI
CONTACT STRESSES
RESPONSES
SIMULATION
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
C
IF:
9.1
论文数:
2.0K
被引数:
10.0K
机构
引用论文
.png){kind=icon}
Does including psychotherapy in health insurance represent a subsidy to the rich from the poor?
PREAI
分享收藏Shear modulus and damping ratio of rubber-modified asphalt mixes and unsaturated subgrade soils
PREAI
分享收藏分享收藏
查看更多内容