.png){kind=icon}
返回
Automatic hyperparameter tuning of topology optimization algorithms using surrogate optimization
.png){kind=icon}
OA
AI
DOI：10.1007/s00158-024-03850-7.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This paper presents a new approach that automates the tuning process in topology optimization of parameters that are traditionally defined by the user. The new method draws inspiration from hyperparameter optimization in machine learning. A new design problem is formulated where the topology optimization hyperparameters are defined as design variables and the problem is solved by surrogate optimization. The new design problem is nested, such that a topology optimization problem is solved as an inner problem. To encourage the identification of high-performing solutions while limiting the computational resource requirements, the outer objective function is defined as the original objective combined with penalization for intermediate densities and deviations from the prescribed material consumption. The contribution is demonstrated on density-based topology optimization with various hyperparameters and objectives, including compliance minimization, compliant mechanism design, and buckling load factor maximization. Consistent performance is observed across all tested examples. For a simple two hyperparameter case, the new framework is shown to reduce amount of times a topology optimization algorithm is executed by 90% without notably sacrificing the objective compared to a rigorous manual grid search.
Keyword:
Topology optimization
Parameter tuning
Hyperparameter optimization
Surrogate optimization
期刊
IF:
4
论文数:
4.9K
被引数:
1.7W
机构
暂无机构信息
引用论文
Topology optimization with linearized buckling criteria in 250 lines of Matlab在Matlab的250线中使用线性化屈曲准则进行拓扑优化
PREAI
分享收藏
Taking the Human Out of the Loop: A Review of Bayesian Optimization将人类带出循环: 贝叶斯优化的回顾.png)
PROCEEDINGS OF THE IEEE
PROCEEDINGS OF THE IEEEIF25.9
PREAI
分享收藏Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design考虑悬垂约束的拓扑优化: 通过设计消除增材制造中的牺牲支撑材料
PREAI
分享收藏
查看更多内容