.png){kind=icon}
返回
Autonomous magnetic node for wireless sensor networks
.png){kind=icon}
PRE
AI
DOI：10.1117/12.582844.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Quantum Magnetics has developed an autonomous battery-powered magnetic sensor node for distributed wireless sensor networks. The device digitizes the sensor output signals and transmits data over an RF link using a ZigBee 802.15.4 protocol. The prototype node incorporates Magneto-Resistive (MR) chips configured to measure all three components of the magnetic field, a logic device, analog-to-digital converters, a two-axis tilt sensor, a wireless transceiver, and a set of batteries, For use in outdoor environments, the sensor node is also GPS-ready. At present, the unit measures approximately 4 inches on a side, with about 40% of the volume occupied by the batteries. Using battery power, the node can operate for about 10 hours in a continuous mode and up to 40 hours with a 10% duty cycle. Efforts are underway to develop the next-generation magnetic node with significant reduction in size and part count.
Keyword:
magnetic node
magnetoresistive sensor
wireless
intrusion
detection range
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
