.png){kind=icon}
返回
Avoiding 5-axis singularities using tool path deformation
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ijmachtools.2003.10.008.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This paper deals with a topical method for avoiding the tool to traverse singular positions in 5-axis machining. It is well known that the inverse kinematics transformation generates singular positions for which incoherent movements of rotary axes appear. However, in the paper, we show that due to uncertainties on the positioning, the singular position is actually characterized by a cone. We thus adopt the concept of singular cone. Following, we propose a method to deform the tool path so that the tool does not traverse the singular cone during machining. This method takes advantage of the description of the tool trajectory as B-spline curves. Therefore, the deformation corresponds to the displacements of certain control points wisely chosen. As the corrected tool path must still verify the machining tolerance, the displacement is limited by the admissible displacement which can be calculated in function of the geometrical characteristics of the tool and of the specified machining tolerance. The deformation method we propose can be extended so that the contact point is preserved. Our purpose is illustrated through the example of the machining of a surface in 5-axis high-speed machining (HSM). This illustration shows the efficiency of our method: incoherent movements are eliminated after tool path deformation and the dynamic performance of the machine tool is improved. (C) 2003 Elsevier Ltd. All rights reserved.
Keyword:
singular position
HSM
B-spline description format
inverse kinematics transformation
tool path deformation
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
18.8
论文数:
3.6K
被引数:
1.8W
机构
暂无机构信息
引用论文
.png){kind=icon}
分享收藏分享收藏A constant feed and reduced angular acceleration interpolation algorithm for multi-axis machining
PREAI
分享收藏
查看更多内容