返回
Bayesian-optimization-assisted efficient operation for direct ammonia solid oxide fuel cells
DOI:10.1016/j.jpowsour.2024.235194.png)
摘要
En 中文
The direct ammonia solid oxide fuel cell (DA-SOFC) is a promising energy conversion device that directly utilizes the ammonia as a fuel through the ammonia cracking inside the fuel electrode. However, because given that various operating parameters related to the electrochemical performance and ammonia cracking reaction, which significantly affects the efficiency and performance of DA-SOFCs, have multi-dimensional and complex correlations under multi-physics situations, considerable time, cost, and manpower investments are required to find the optimum operating conditions. Here, we demonstrate the effectiveness of Bayesian optimization (BO), an iterative response-model-based global optimization algorithm, when used for the rapid determination of the optimum operating conditions of DA-SOFCs. First, we compared nine BO-based models with 1,140 collected data sets for the ground truth, with four-dimensional variable conditions, i.e., the temperature, voltage, fuel flow rate, and the ammonia mole fraction. To select the appropriate BO model, we evaluated the performance of each model, which have the surrogate models (Matern kernel 3/2 and 5/2, and radial basis function) and the acquisition functions (Probability of improvement (PI), Expected improvement, and Lower confidence bound). Among them, the surrogate model consisting of a Matern kernel 3/2 and the acquisition function of PI exhibits the highest performance with high reliability when tasked with finding the global optimum with ground-truth data. Thereafter, this model is introduced to find the optimum operating conditions without the ground truth. With only four experimental trials, it finds a better operating condition that shows 10-20 % higher current density compared to that under conventionally used conditions.
Keyword:
Bayesian optimization
Direct-ammonia solid oxide fuel cell
Operating condition optimization
期刊
IF:
7.9
论文数:
3.7W
被引数:
15.0W
机构
引用论文
Optimisation of processing and microstructural parameters of LSM cathodes to improve the electrochemical performance of anode-supported SOFCs优化LSM阴极的加工和微观结构参数以改善阳极支撑的sofc的电化学性能
Towards online optimisation of solid oxide fuel cell performance: Combining deep learning with multi-physics simulation
ENERGY AND AI
IF9.6
Direct methane protonic ceramic fuel cells with self-assembled Ni-Rh bimetallic catalyst具有自组装ni-rh双金属催化剂的直接甲烷质子陶瓷燃料电池
NATURE COMMUNICATIONS
IF15.7
Taking the Human Out of the Loop: A Review of Bayesian Optimization将人类带出循环: 贝叶斯优化的回顾
PROCEEDINGS OF THE IEEE
IF25.9
Tailoring the Microstructure of a Solid Oxide Fuel Cell Anode Support by Calcination and Milling of YSZ通过YSZ的煅烧和研磨来定制固体氧化物燃料电池阳极载体的微观结构
SCIENTIFIC REPORTS
IF3.9

