.png){kind=icon}
返回
Capillary force actuators: Modeling, dynamics, and equilibria
.png){kind=icon}
PRE
AI
DOI：10.1016/j.mechatronics.2011.07.007.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Capillary force actuators provide forces via the alteration of the capillary pressure within a conducting liquid bridge through the application of electrical potential. A dynamic model of a capillary force actuator is developed. Separate models of the fluid/flexured platen and electrodynamics are constructed and linked together via the Young-Lippmann relation. Since the bridge height is small in comparison to the diameter, the liquid slug is shown to have a parabolic velocity profile. The radial pressure variation is then readily determined. Integration of the pressure and summation of the contact line tension term yields the actuation force. Combining this model with the electrodynamics and mechanical components yields a nonlinear model relating applied voltage to platen movement. The equilibria of this equation are determined as a function of voltage and their stability are analyzed. We show that the equilibrium will be stable for displacements exceeding one-third of the nominal bridge height, a greater range than that obtained with parallel plate electrostatic actuators. Depending on actuator design this range may be as large as 7/9th of the nominal bridge height but no larger. (C) 2011 Elsevier Ltd. All rights reserved.
Keyword:
Actuators
Electrowetting
Capillary force
Models
Microsystems
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.1
论文数:
2.9K
被引数:
5.7K
.png){kind=icon}
没有更多内容