.png){kind=icon}
.png){kind=icon}
Return
Case study of SPRERI natural draft gasifier installation at a ceramic industry
.png){kind=icon}
PRE
AI
P
S
S
DOI：10.1016/S0961-9534(02)00009-0.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
The Sardar Patel Renewable Energy Research Institute has recently introduced its natural draft gasifier burner system to replace the use of light fuel oil in ceramic product drying. The unit (rated at 350 kW(th)) consumed about 80 kg h(-1) of sawmill residues in the form of slabs 8 and 12 cm long, 5-7 cm wide. and 2.5-3 cm thick. The oil replacement is about 17 1 h-1. Two types of batch driers, a rotary kiln and a tray drier, are used to dry the ceramic material from 20% to 10% moisture on a total mass basis. The tray drier is also used to dry molded ceramics in addition to the dewatered raw material ceramic cake. The cost savings over LFO are reduced by a factor of four to five units cost of output and the system repays its investment in less than two months. (C) 2002 Elsevier Science Ltd. All rights reserved.
Keywords:
natural draft gasifier
ceramic product drying
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
5.8
Papers:
8.4K
Citations:
2.2W
Organization
No organization information available