.png){kind=icon}
返回
Cathode Interface Construction by Rapid Sintering in Solid-State Batteries
.png){kind=icon}
OA
AI
DOI：10.1002/smll.202307342.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Solid-state batteries (SSBs) are poised to replace traditional organic liquid-electrolyte lithium-ion batteries due to their higher safety and energy density. Oxide-based solid electrolytes (SEs) are particularly attractive for their stability in air and inability to ignite during thermal runaway. However, achieving high-performance in oxide-based SSBs requires the development of an intimate and robust SE-cathode interface to overcome typically large interfacial resistances. The transition interphase should be both physically and chemically active. This study presents a thin, conductive interphase constructed between lithium aluminum titanium phosphate and lithium cobalt oxide using a rapid sintering method that modifies the interphase within 10 s. The rapid heating and cooling rates restrict side reactions and interdiffusion on the interface. SSBs with thick composite cathodes demonstrate a high initial capacity of approximate to 120 mAh g-1 over 200 cycles at room temperature. Furthermore, the rapid sintering method can be extended to other cathode systems under similar conditions. These findings highlight the importance of constructing an appropriate SE-cathode interface and provide insight into designing practical SSBs. Using a 10 s rapid sintering method, a thin conductive interphase is constructed between lithium aluminum titanium phosphate and lithium cobalt oxide. This method is used to make solid-state batteries with thick composite cathodes that demonstrate a high initial capacity of approximate to 120 mAh g-1 over 200 cycles at room temperature.image
Keyword:
cathode interface
co-sintering
LATP
oxide-based solid electrolytes
solid-state batteries
期刊
IF:
12.1
论文数:
3.0W
被引数:
16.4W
机构
引用论文
Garnet-Based Solid-State Li Batteries: From Materials Design to Battery Architecture基于石榴石的固态锂电池: 从材料设计到电池架构.png)
ACS ENERGY LETTERS
ACS ENERGY LETTERSIF18.2
PREAI
分享收藏Competing Effect of Co3+ Reducibility and Oxygen-Deficient Defects Toward High Oxygen Evolution Activity in Co3O4 Systems in Alkaline Medium碱性介质中Co3O4系统中Co3还原性和缺氧缺陷对高放氧活性的竞争作用
PREAI
分享收藏Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition通过原子层沉积稳定NASICON固体电解质对Li金属的界面
PREAI
分享收藏Rapid Thermal Annealing of Cathode-Garnet Interface toward High-Temperature Solid State Batteries阴极-石榴石界面对高温固态电池的快速热退火NANO LETTERS
NANO LETTERSIF9.1
PREAI
分享收藏分享收藏分享收藏PI-LATP-PEO Electrolyte with High Safety Performance in Solid-State Lithium Metal Batteries固态锂金属电池中高安全性能的pi-latp-peo电解质
PREAI
分享收藏Co-sintering process of LiCoO2 cathodes and NASICON-type LATP solid electrolytes studied by X-ray diffraction and X-ray absorption near edge structure通过x射线衍射和x射线吸收近边缘结构研究LiCoO2阴极和NASICON型LATP固体电解质的共烧结过程
PREAI
分享收藏A Long Cycle Life, All-Solid-State Lithium Battery with a Ceramic-Polymer Composite Electrolyte具有陶瓷-聚合物复合电解质的长循环寿命全固态锂电池
PREAI
分享收藏
查看更多内容