返回
Characterisation tools development for PEM electrolysers
DOI:10.1016/j.ijhydene.2014.02.096.png)
摘要
En 中文
Electrochemical impedance spectroscopy (EIS), current interrupt (CI) and current mapping (CM) were investigated as in-situ characterisation tools for PEM electrolysers. A 25 cm(2) cell with titanium anode and carbon cathode plates were utilised in this study. A commercial MEA consisting of 1 mg IrO2/cm(2) on the anode and 0.3 mg Pt/cm(2) on the cathode was used. The electrocatalyst was deposited on Nafion (R) membranes. The electrochemical losses in a PEM electrolyser namely: activation, ohmic and mass transfer losses were identified using EIS and CI and both the advantages and disadvantages of the methods were discussed. The current distribution over the membrane electrode assembly (MEA) at different current densities was measured using the current mapping method. It is also shown that under the given experimental conditions the current density decreases along the serpentine flow field. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
Keyword:
Hydrogen
Electrochemical impedance spectroscopy (EIS)
Current interrupt (CI)
Current mapping (CM)
Proton exchange membrane (PEM)
Electrolyser
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
8.3
论文数:
5.5W
被引数:
23.1W
机构
引用论文
Initial Performance and Durability of Ultra-Low Loaded NSTF Electrodes for PEM Electrolyzers用于PEM电解槽的超低负载NSTF电极的初始性能和耐久性
Energetic evaluation of high pressure PEM electrolyzer systems for intermediate storage of renewable energies用于可再生能源中间存储的高压PEM电解槽系统的能量评估
ELECTROCHIMICA ACTA
IF5.6
Hydrogen from renewable electricity: An international review of power-to-gas pilot plants for stationary applications来自可再生电力的氢: 用于固定应用的电力到气体中试工厂的国际评论

