.png){kind=icon}
返回
Characterizing force-chain network in aggregate blend using discrete element method and complex network theory
.png){kind=icon}
PRE
AI
DOI：10.1016/j.conbuildmat.2023.132724.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The force chain network in aggregate blend indicates load transfer path and is the main carrier to resist external loads. The objective of this study is to analyze the force chain network characteristics of aggregate blend on the basis of complex network theory. The virtual aggregate blend models with three stone matrix asphalt (SMA) gradations and three dense asphalt concrete (AC) gradations were constructed using discrete element method (DEM). The force chain network topology structure of each aggregate blend was established according to the aggregate contact parameters extracted from DEM software and the introduced complex network theory. The characteristics of each force chain network were analyzed by the various network evaluation indicators. The results showed that there are two or more contacts between most particle pairs. The average coordination number and the average contact number of aggregate blend are not equal. The degree distribution of each gradation shows a good power-law distribution. The force chain network of aggregate blend is a scale-free network. Big particles have greater average strength and smaller average weight distribution difference compared with small particles. The reference lower limit has better clustering performance for SMA-16, and the reference upper limit has better clustering performance for AC-25. The average path length of SMA-16 is longer than that of AC-25, indicating that SMA-16 has better load transfer ability and skeleton properties.
Keyword:
Aggregate blend
Force chain network
Discrete element method
Complex network theory
Network evaluation indicators
期刊
IF:
8
论文数:
4.5W
被引数:
27.9W
机构
暂无机构信息
引用论文
Stability prediction for asphalt mixture based on evolutional characterization of aggregate skeleton
OAAI
.png){kind=icon}
OAAI分享收藏Investigation of the internal structure change of two-layer asphalt mixtures during the wheel tracking test based on 2D image analysis基于二维图像分析的两层沥青混合料车辙试验过程中内部结构变化研究
PREAI
分享收藏Mesostructural characteristics and evaluation of asphalt mixture contact chain complex networks
PREAI
分享收藏Evaluation of coarse aggregate movement and contact unbalanced force during asphalt mixture compaction process based on discrete element method基于离散元法的沥青混合料压实过程粗集料移动及接触不平衡力评价
PREAI
分享收藏Effect of the contact structure characteristics on rutting performance in asphalt mixtures using 2D imaging analysis接触结构特征对沥青混合料车辙性能影响的二维图像分析
PREAI
分享收藏
查看更多内容