.png){kind=icon}
返回
CO2 capture using a functional protic ionic liquid by membrane absorption
.png){kind=icon}
PRE
AI
DOI：10.1016/j.joei.2016.08.001.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
An amino acid-functionalized protic ionic liquid (IL), monoethanolamine glycinate ([MEA][GLY]), was used as a CO2 absorbent. Its performance was evaluated by a membrane gas absorption (MGA) process. Various effect factors including both absorbent aspect and operational parameters were investigated in MGA for CO2 capture. Performance of [MEA][GLY] IL was also compared with that of an amino acid salt and an amine. Liquid CO2 loading of the functional protic IL was the largest in three absorbents, presenting an order of [MEA][GLY]>PGLY>MEA. [MEA][GLY] IL obtained a high membrane flux and a low gas outlet CO2 concentration in MGA process. It could reach 3.25 x 10(-4) mol m(-2) s(-1) of membrane flux. The IL could achieve higher initial and instantaneous membrane fluxes and the maximal membrane flux with a range of optimum concentration of 3.5-4.5 mol L-1. Change of operational parameters, especially gas CO2 mole fraction, can significantly affect and enhance the membrane flux of MGA on a limited scale. [MEA][GLY] IL is a more environmentally-friendly and efficient CO2 absorbent. (C) 2016 Energy Institute. Published by Elsevier Ltd. All rights reserved.
Keyword:
Functional protic ionic liquid
CO2 capture
Membrane absorption
Performance evaluation
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.2
论文数:
2.9K
被引数:
8.1K
机构
暂无机构信息
引用论文
.png){kind=icon}
分享收藏分享收藏Absorber design for the improvement of the efficiency of post-combustion CO2 capture用于提高燃烧后CO2捕获效率的吸收器设计
PREAI
分享收藏
查看更多内容