.png){kind=icon}
返回
CO2 capture
.png){kind=icon}
PRE
AI
DOI：10.1016/j.seppur.2024.128980.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Microtubule-structured, Mn/Fe binary-doped dolomite-derived sorbents were synthesized by impregnated layer combustion synthesis method for direct solar-driven calcium looping system. The temperatures at which combustion occurs-specifically, 600, 700, 800, and 900 degrees C-as well as the modes used for impregnation, namely the wet and dry impregnated layer combustion synthesis methods, have a significant impact on both the CO2 2 capture performance and the optical absorbance of the sorbent. Overall, the cyclic CO2 2 capture performance of the microtubule-structured sorbents has been significantly enhanced, with a mere loss of 0.10 % to 0.32 % in CO2 2 capture capacity after 20 cycles, attributed to the distinctive porous structure of the absorbent paper. Moreover, the combustion synthesis temperature exceeds a certain threshold, it will compromise the integrity of the hollow microstructure of the sorbent, and 800 degrees C is the desirable synthesis combustion temperature. The average solar absorbance of the sorbent significantly improves under various impregnation modes at 800 degrees C, reaching 66 % to 69 %. This enhancement is attributed to the formation of Ca2Fe2O5 2 Fe 2 O 5 and Ca2MnO4, 2 MnO 4 , along with the decomposition of CaCO3. 3 . It's noteworthy that the citric acid complexed microtubule-structured, dolomite-derived sorbent exhibits the highest and most consistent CO2 2 capture capacity, retaining 93.5 % of its initial CO2 2 capture capacity (0.243 g/g) by the 20th cycle. It alongside possesses the highest average solar absorbance of 69 %, underscoring the efficacy of citric acid complexes in achieving atomic-level uniformity.
Keyword:
CO2 capture
Direct solar-driven calcium looping
Impregnation combustion synthesis
Combustion temperature
期刊
IF:
9
论文数:
3.0W
被引数:
12.1W
机构
引用论文
Effect of titanium and zirconium carbide interphases on the thermal conductivity and interfacial heat transfers in copper/diamond composite materials.png)
AIP Advances
OAAI
AIP AdvancesIF0
OAAI分享收藏Calcium-based composites directly irradiated by solar spectrum for thermochemical energy storage太阳光谱直接辐照下的钙基复合材料热化学储能研究
PREAI
分享收藏Cyclic calcination/carbonation looping of dolomite modified with acetic acid for CO2 capture乙酸改性白云石的循环煅烧/碳酸化循环捕集CO2
PREAI
分享收藏Influence of the solution pH on the design of a hydro-mechanical magneto-hydraulic sealing device
PREAI
分享收藏分享收藏Calcium-based composites for direct solar-thermal conversion and thermochemical energy storage用于直接太阳能热转换和热化学储能的钙基复合材料
PREAI
分享收藏Hydrophobic interface-assisted casting of Al-supported, CaO-based sorbent pellets for high-temperature CO2 capture用于高温CO2捕获的Al支撑的CaO基吸附剂颗粒的疏水界面辅助铸造
PREAI
分享收藏
查看更多内容