.png){kind=icon}
返回
Compact optically pumped magnetometer light source stabilization with regulated feedbacks
.png){kind=icon}
PRE
AI
DOI：10.1016/j.sna.2023.114869.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Optically pumped magnetometers (OPMs) are very sensitive to magnetic field and have the advantages of portability and low cost. In the miniaturized OPM, a vertical cavity surface emitting laser (VCSEL) diode is utilized to generate the laser light for both pumping and probing, the stability of which significantly affects the sensor's performance. Therefore, precisely control of the light source is required. This paper proposes a novel method of stabilizing the laser diode output by using a close-loop control with two feedbacks, namely: the measurement of the diode temperature and the output signal of the photodetector. The control coefficients of these two feedbacks are regulated dynamically according to the operating state of the OPM. The experimental results show that after operating for 1000 s, the Allan deviation of the photodetector signal is 3.98 x10-4 for the proposed method, as a comparison, the Allan deviation is 2.56 x10-2 for a conventional close-loop control technology. The proposed method performs better for long-time operations. A compact OPM is developed and tested, which employ the proposed scheme to control the output of the VCSEL diode. The experiment results show that a sensitivity of 16 fT/Hz1/2 @ 10 Hz is achieved and the OPM can operate stably in a long time.
Keyword:
Optically pumped magnetometer
Laser diode stability
Close-loop control
期刊
IF:
4.9
论文数:
1.5W
被引数:
3.3W
机构
引用论文
Fast and Sensitive HPLC Method for The Determination of Neopterin, Kynurenine and Tryptophan in Amniotic Fluid, Malignant Effusions and Wound Exudates.png)
Bioanalysis
BioanalysisIF0
PREAI
分享收藏
分享收藏
Stability of form II of syndiotactic polypropylene confirmed by cold and melt crystallization in supercritical carbon dioxidePolymer
PolymerIF0
PREAI
分享收藏
查看更多内容