Compensation for Dynamic Subdivision Error When the Grating Displacement Sensor Code Disk is Stained

doi:10.1109/JSEN.2022.3232708

2023-02-01

PRE

Changhai Zhao *

Qiuhua Wan

Lihui Liang

DOI：10.1109/JSEN.2022.3232708

原文链接

原文求助

摘要

En 中文

When the code disk of a displacement sensor gains dust or other impurities, its moire fringe signal will deviate from the standard range, which increases subdivision error. In this study, a high-speed A/D converter was used to collect the moire fringe signal of a sensor in real time and to extract the characteristic points. The center point trajectory of the moire fringe signal Lissajous figure was calculated, and the amplitude values of the two moire fringe signals were determined according to characteristic points. The moire fringe signals according to the center point trajectory and signal amplitudes were then normalized. Error compensation of the dc level and amplitude of moire fringe signals was realized, so as to improve the dynamic subdivision accuracy of moire fringe signals when the code disk was stained. Experiments showed that, when the reading head was in the stained area of the code disk, the subdivision error of moire fringe signals was reduced from the peak value of 37.2 '' to 4.6 '', and the accuracy of the sensor can be improved using this algorithm for both different resolutions and different stains, which greatly improved the ability of the displacement sensor to adapt to a harsh environment.

Keyword:

Sensors

Sensor phenomena and characterization

Codes

Gratings

Harmonic analysis

Error compensation

Standards

Characteristic points

error compensation

grating

stain