.png){kind=icon}
返回
Comprehensive modelling framework for a low temperature gradient thermoelectric generator
.png){kind=icon}
PRE
AI
DOI：10.1016/j.enconman.2021.114721.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Thermoelectric energy harvesting (TEH) is a promising technology enabling the self-sustainable operation of ultra low-power sensing devices performing monitoring tasks. Conventional TEH research mainly focuses on the improvements of the material properties (i.e thermoelectric figure of merit ZT) and thermoelectric module (TEM) geometry. However, enhanced performance of the thermoelectric generator (TEG) can not be practically achieved without optimal integration of the novel TEM with the DC-DC converter. The power converter, having its own input impedance requirements and conversion efficiency curve, may keep the operation point of TEG far from the maximum power point of TEM, leading to power loss. Furthermore, since the physical processes in the thermoelectric transducer are coupled with the electrical processes in the DCDC converter, both components should be analyzed together to achieve the best harvesting performance. Given the system complexity, an accurate simulation model is required to estimate the output power and make an optimal system design. We report on a simulation approach for low temperature gradient TEG that accounts for both the thermoelectric and the power conversion processes. The proposed approach was validated on the TEG testbed by imitating the realistic ambient conditions for thermoelectric transducer connected to a commercial off-the-shelf DC-DC converter. Experimental results are characterized by 9% mean percentage error of power estimation which outperforms the methods based on conventional TEG representations.
Keyword:
DC-DC power converters
Energy harvesting
System modelling
Thermoelectric devices
期刊
IF:
10.9
论文数:
2.0W
被引数:
11.3W
机构
引用论文
Flexible thermoelectric generator using bulk legs and liquid metal interconnects for wearable electronics可穿戴电子设备使用大块腿和液态金属互连的柔性热电发电机.png)
APPLIED ENERGY
OAAI
APPLIED ENERGYIF11
OAAI分享收藏
Further Efficiency Improvement of Power Amplifiers Using Thermal Energy Harvesting使用热能收集进一步提高功率放大器的效率
PREAI
分享收藏
查看更多内容