Constrained multivariable control of a distillation column using a simplified model predictive control algorithm

doi:10.1016/S0959-1524(00)00029-9

2001-10-01

PRE

DOI：10.1016/S0959-1524(00)00029-9

原文链接

原文求助

摘要

En 中文

Distillation columns are important process units in petroleum refining and need to be maintained close to optimum operating conditions because of economic incentives. Model predictive control has been used for control of these units. However, the constrained optimization problem involved in the control has generally been solved in practice in a piece-meal fashion. To solve the problem without decomposition, the use of a linear programming (LP) formulation using a simplified model predictive control algorithm has been suggested in the literature. In this paper, the LP approach is applied for control of an industrial distillation column, The approach involved a very small size optimization problem and required very modest computational resources. The control algorithm eliminated the large cycling in the product composition that was present using SISO controllers. This resulted in a 2.5% increase in production rate, a 0.5% increase in product recovery, and a significant increase in profit. (C) 2001 Elsevier Science Ltd. All rights reserved.

Keyword:

distillation column control

model predictive control

constraint control