Continuous color reflective displays using interferometric absorption

John Hong

doi:10.1364/OPTICA.2.000589

2015-06-23

DOI：10.1364/OPTICA.2.000589

原文链接

查看原文

摘要

En 中文

Reflective displays that rely on ambient light as opposed to an internal light source have been making inroads for a variety of important applications, especially those involving mobility where power usage must be aggressively controlled. The underlying color rendering strategies for both reflective and emissive displays have largely been the same, combining three fixed, primary color subpixels to compose the rich gamut that users expect. The result, for reflective color displays, is unfavorable brightness/gamut performance since each of the color subpixels absorbs roughly 2/3 of the incident white light. We demonstrate a new technology that we call the single mirror interferometric display that overcomes such limitations with pixels whose reflectance properties can tune through a continuum of colors, including high contrast black and white reflectance states. We use an effect that we call interferometric absorption in which a thin absorbing metal layer in front of a highly reflective mirror surface selectively absorbs different colors, depending on the gap that separates the two. The gap is controlled by electrostatic actuation in a relatively simple microelectro- mechanical-system structure. We describe this elegant and powerful color rendering principle and present experimental results for the basic pixel device as well as early system demonstrations. (C) 2015 Optical Society of America