.png){kind=icon}
返回
Control system and process optimization for electroless nickel plating
.png){kind=icon}
OA
AI
DOI：10.1063/10.0034399.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A novel method based on mid-frequency vibration is proposed to eliminate coating defects such as bubbles during electroless nickel plating. An automated control system for the plating, enabling precise and stable measurements and adjustments of critical parameters such as plating solution temperature, pH, and nickel ion concentration, is also established, which significantly improves process efficiency and coating quality. Experimental results indicate that the system is capable of realizing stable operation over extended periods. A nonporous nickel-phosphorus coating with a thickness greater than 200 mu m is successfully obtained, with high phosphorus content, robust adhesion, and superior machinability.
Keyword:
Electroless nickel plating
Automated control
Mid-frequency vibration
Elimination of coating defects
Superior machinability
期刊
IF:
2.7
论文数:
288
被引数:
600
机构
引用论文
Combinatorial performance characteristics of agitated nickel hypophosphite electroless plating baths
PREAI
分享收藏A Highly Selective and Interference-Resistive Opto-Mechatronic Sensor for Fast Detection of Nickel Ions.png)
IEEE SENSORS JOURNAL
IEEE SENSORS JOURNALIF4.5
PREAI
分享收藏Effects of biotic factors on emergence and survival ofQuercus emoryiat lower treeline,Arizona, U.S.A.Écoscience
ÉcoscienceIF0
PREAI
分享收藏Corrosion performance of electroless Ni-P on polymer coating of MAO coated AZ31 magnesium alloy
PREAI
分享收藏
查看更多内容